Nikon DLP 837 Series - Manual (Page 31)

3. Using TV Features 31
Introduction to H ome-Theater Control
This TV offers a choice on home-theater-control systems. This summary offers some examples of the control
methods available using the TV’s remote control. You may wish to use one or more of these methods in your
home theater after completing Auto Input Sensing.
Source device connected directly to the TV
Remote Control Programming (Any Connection Type)
Program the remote control to operate the A/V device. To control the device, set
the remote control to the correct mode for the device type. See Appendix B , “ Pro-
gramming the Remote Control .” In the case of an A/V receiver, use the Audio Lock
feature, page 60 .
Any Connection Type
TV A/V
Device
C EC-Enabled HDMI Device (HDMI Connection Only)
See Appendix C , “HDMI Control of CEC Devices,” page 66 .
TV
CEC-Enabled
A/V Device
HDMI
Cable
837 Series: NetCommand IR Control (Any Connection Type)
Set up Net Command IR control of the device’s keys as desired. See “IR Emitter
Placement,” page 46 , and “Initial NetCommand Setup,” page 47 . Any Connection Type
TV
A/V
Device
Source device connected to an A/V receiver connected to the TV
CEC-Enabled HDMI A/V Receiver
The TV’s remote control may operate some functions of a connected A/V device.
You can switch to the device by selecting its icon in the TV’s Activity menu. See
Appendix C , “HDMI Control of CEC Devices,” page 66 .
HDMI
Cable
HDMI
Cable
TV
CEC-Enabled
Source Device
A/V Receiver
837 Series: A/V Receiver with HDMI Output (no CEC)
Set up Net Command IR control of the 1. A/V receiver’s keys as desired. See “IR
Emitter Placement,” page 46 , and “Setting Up A/V Receiver Control,” page 52 .
Set up Net Command IR control of the 2. source device’s keys as desired. See
“NetCommand Control of a Device Connected to an HDMI A/V Receiver,” page
55 . TV
Any Con-
nection Type
Source
Device
A/V Receiver
HDMI
Cable