Nikon DLP 837 Series - Manual (Page 30)

30 3. Using TV Features
Phot os and Moving Video
as Composite Video
Connect the camera to the TV using a composite video
cable if:
• You are unable to see images using the USB port.
• You wish to view moving video from the camera.
Control the slide show or movie through the camera as
the TV’s USB Media Player menu will be unavailable.
The display resolution will be standard-definition (480i).
Refer to the owner’s manual supplied with the 1.
camera for instructions needed for this setup.
Set the camera’s output signal type to 2. NTSC and
put the camera into playback mode.
With the camera still turned on, connect your digital 3.
camera’s composite video cable (usually yellow) to
the TV’s Y/VIDEO jack. To hear audio, connect the
camera’s audio output cable to the AUDIO L jack.
Optional
Audio Cable
USB HDMI 4
INPUT 3
AUDIO L R Pb Y/ VIDEO Pr USB HDMI 4
INPUT 3
AUDIO L R Pb Y/ VIDEO Pr
INPUT 3
AUDIO L Y/ VIDEO
Camera connection using a composite video cable
When the 4. New Device Found screen displays,
assign the name Camcorder.
Press 5. BACK to close the New Device Found screen.
Press 6. ACTIVITY, select Watch Movie > Cam, and
press ENTER.
If viewing photos, advance through the images 7.
manually or set the camera to advance automati-
cally.