NEC 2000 Series - Manual (Page 49)

3-16 Configuring the System
Advanced Menu
Menu Item Settings (default is bold)
Floppy Disk Controller Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the controller.
Setting at Auto enables the BIOS or
operating system to configure the controller.
Base I/O Address Primary, Secondary
Sets the base I/O address for the controller.
Large Disk Access Mode Other, DOS
Select DOS if using DOS operating system.
Select Other if using another operating
system such as UNIX or Novell NetWare.
Local Bus IDE Adapter Disabled, Primary, Secondary, Both
Enables the integrated local bus IDE
adapter.
QuickBoot Mode Disabled, Enabled
When Enabled, the BIOS does not test
system memory above 1 MB or wait for
ready signals, allowing a quick boot.
Sound Enabled, Disabled
Select Disabled to turn off onboard sound.
DMI Event Logging Press Enter to access the following
submenus.
Event Log Capacity Status only.
Event Log Validity Status only.
View DMI Event Log Status only, press Enter to view.