Nokia 2855 - Manual (Page 85)

Copyright © 2006 Nokia. All rights reserved.
O r g a n i s e r
75
appears below the running time.
Each time you select Split , the new
measured time appears at the
beginning of the list. The maximum
number of splits is 20.
Lap timing —Use the lap time
function when you want to track
how long it takes to complete each
cycle or lap. Select Lap to note the
lap time. The clock stops, then
immediately restarts from zero. The
lap time appears below the running
time. Each time you select Lap , the
new measured time appears at the
beginning of the list. The maximum
number of laps is 20.
2. Select Stop to end timing and
display total time.
Save a time
To save a time while the clock is
running, select Stop > Save , enter a
name for the measurement, and select
OK . If you do not enter a name, the
total time is used as the default title
for the lap or split time.
Stopwatch options
In standby mode, select Menu >
Organiser > Stopwatch and one of the
following:
Continue —Continues to measure time.
Only appears if clock is running and
you are returning to stopwatch screen.
Show last time —View the last
measured time.
Split timing —Use the split time
function.
Lap timing —Use the lap time function.
View times —Browse saved times.
Delete times > One by one or Delete
all —Delete saved times.
Operation note
If you press the end key and return to
standby mode, the clock continues to
run in the background, and
appears at the top of the screen.
To return to the Stopwatch screen, do
the following:
1. In standby mode, select Menu >
Organiser > Stopwatch >
Continue .
2. To stop the clock, select Stop .