Nokia 2855 - Manual (Page 72)

Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
62
Home only —You can make and receive
calls in your home area only.
Automatic —The phone automatically
searches for service in another digital
network. If one is not found, the phone
uses analog service. The roaming rate
applies when not in the home service
area.
Automatic A —The phone automatically
searches for service in another digital
network. The roaming rate applies
when not in the home service area.
Automatic B —The phone automatically
searches for service in another digital
network. If one is not found, the phone
uses analog service. The roaming rate
applies when not in the home service
area.
Mode
If supported by your wireless service
provider or network operator, you can
choose whether your phone will use
digital or analog service. In standby
mode, select Menu > Settings >
Network > Mode and one of the
following.
Digital preferred —You prefer to make
calls on a digital network, but will find
another network, if necessary.
Analog only —You can make and
receive calls on an analog network
only.
Analog per call —You can select an
analog network on a call to call basis.
IS-95 per call —You can select an IS-95
network on a call to call basis.
Digital only —You can make and receive
calls on a digital network only.
■ Network services
The following features are network
services. See also “ Network services ”,
p. viii .
Store a feature code
Network feature setting allows you to
activate network services in your
phone using feature codes received
from your service provider.
1. In standby mode, select Menu >
Settings > Network services >
Network feature setting .
2. Enter the feature code from your
service provider (for example, *900
for activating Divert if busy ), and
select OK .
3. Select Call divert .
4. Scroll to the type of diverting that
matches the feature code you
entered (for example, Divert if
busy ), select Activate .
The activated feature code is now
stored in your phone, and you are
returned to the Feature code: prompt.
Continue entering other feature codes