Nokia 110T - Manual (Page 4)

GB 4
Remote control
Remote control
This section describes how to operate the Mediamaster using the buttons on the remote control.
The cursor buttonl
Press once to turn the sound off/on (mute).
Press and hold for a few seconds to switch the
Mediamaster into standby mode. In addition, press this
button to switch the Mediamaster on.
back To go back one level at a time within menus
select To confirm the selection of a highlighted item.
info To display brief and detailed information (if transmitted) about
current and forthcoming programmes
0 - 9 To change the channel and to select individual menu options.
NOTE: If 0 is entered as the first digit, the TV Release
functionality is activated (see below).
0 To toggle between the 110 T and any equipment connected to
the TV Scart; e.g., a VCR or satellite receiver.
opt To display temporary settings options while watching TV.
When a TV or Radio channel has been highlighted with the Navi
Bars, press this button to get technical information about the
channel.
txt Press to enter Teletext (if available).
Cursor down
Move down in the menus
and change to the previous
channel in viewing mode.
Cursor right
Move right/change settings in
menus.
Increase the volume level in
viewing mode.
Cursor up
Move up in the menus and
change to the next channel
in viewing mode.
Cursor left
Move left/change set-
tings in menus.
Decrease the volume
level in viewing mode.