Nokia 110T - Manual (Page 20)

Navi Bars
GB 20
Advanced manual search
You can use this menu if you are looking for some "specific"
channels (i.e., non-DVB standard channels) that are easier to find
once you have entered the necessary PID settings here.
Channel: Select the channel you want to search for.
PID Video: Enter the PID (Packet Identifier) for the video signal.
PID Audio: Enter the PID for the audio signal.
PID PCR: Enter the PID for the PCR (Programme Clock Reference).
• Press select to tune with the specified values.
Channels created with an advanced manual search will get an
automatically generated name, e.g., P0001 for the first channel,
P0002 for the second, etc.
• Press select to save the new channel or back if you do not want
to save it.
Access folder
Receiver lock
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
If you select "Yes", you will have to enter the access code every time
you start the Mediamaster from standby.
Age rating control
If you want everybody to have access to all available types of
programmes, select "No".
If you select "Yes", you may block programmes unsuitable for
children.
Age Limit
Select an age limit between 3 and 18 years on the line that appears.
NOTE: you should be aware that not all service providers have the
necessary codes for these functions implemented in their
transmissions.
Change access code
You can change the access code from the standard factory
setting of 1234.
NOTE: do not forget your access code as without it, you will
not have access to any of the functions that require the code.
If you should forget it, please contact Nokia Support for help.