Making a connection to a service, E settings when gprs is the selected data bearer, Making a – Nokia 3100 User Manual
Page 99: Ee making a connection to a service

Copyright
© 2004 Nokia. All rights reserved.
Us
in
g t
h
e
m
e
nu
99
Us
in
g t
h
e
m
e
nu
Settings when GPRS is the selected data bearer
•
GPRS connection
- Select
When needed
or
Always online
.
•
GPRS access point
- Key in the access point name.
An access point name is needed to establish a connection to a GPRS network. You obtain the
access point name from your network operator or service provider.
•
IP address
- Key in the address, press
for a dot. You obtain the IP address from your network
operator or service provider.
•
Authentication type
- Select
Secure
or
Normal
.
•
Login type
- Select
Manual
or
Automatic
. If you select
Automatic
, the login type uses the user
name and password keyed in the following settings. If you select
Manual
, the login information
is required when establishing a connection.
•
User name
- Key in the user name.
•
Password
- Key in the password.
Making a connection to a service
1. Firstly, make sure that the service settings of the service you want to use are activated. To activate
the settings:
• Press
Menu
, and select
Services
,
Settings
and
Connection settings
. Select
Active service settings
and scroll to the connection set you want to activate and press
Activate
.
2. Secondly, make a connection to the service. There are three ways to connect:
• Open the startpage, for example, the homepage of the service provider: