beautypg.com

Attaching and using the supplied cables – Nokia 5510 User Manual

Page 24

background image

©2002 Nokia Corporation. All rights reserved.

Get

ting

sta

rted

24

To use the headset to receive and make calls

To answer a call while using the headset, press the remote control button which is located in the
microphone part of the headset. To end the call, again press the same button.

If you have saved voice tags to certain phone numbers in your phone book, you can also make calls
using the headset. Press and hold the headset key until you hear a short tone. Say the voice tag. The
phone dials the corresponding phone number.

To receive calls with a headset other than HDD-2: On standby mode, press

(

Answer

). To divert or

reject the call, press

.You can listen to the caller’s voice in your headset, and you will need to talk

into the phone’s microphone. Note that it is always safest to use the HDD-2 headset.

Attaching and using the supplied cables

With the sales package, you receive three cables that you can use with your Nokia 5510 phone.

1. To use a compatible audio headset (impedance 32 ohm) other than HDD-2, attach the supplied

ADA-2 Audio Adapter Cable (number 1 in the picture below) to the 35 mm headset and insert the
adapter in the phone. Note that it is safest to use the supplied headset HDD-2.

2. You can connect your phone to an external audio system (for example, a CD player) by using the

supplied ADE-2 Audio Line In Cable (number 2 in the picture).