NEC LT 100 - Manual (Page 46)

This section provides technical information about the MultiSync LT100 Projector's performance.
Optical
DMD TM
Single Chip Digital Micromirror Device(DMD TM ), 1024
ן768 dots
Lens Manual zoom, manual focus
F 2.44 f =26-30 mm
Lamp Metal halide lamp 280 W
Image Size 610-7620 mm (24-300 inches) diagonal
Projection Distance 1.2 – 12.3m
Contrast Ratio Greater than 200 : 1
Color Temperature 7000 Kelvin
S P E C I F I C A T I O N S 6
89
Electrical
Inputs Video (NTSC / PAL / SECAM / NTSC 4.43)
RGB (H : 15 – 85 kHz, V : 50 – 85 Hz)
Video Bandwidth RGB: 60 MHz
Color Reproduction Full color, 16.7 million colors simultaneously.
Horizontal Resolution NTSC / YCbCr 550, PAL 350, SECAM 350, NTSC4.43 350 TV lines
RGB 1024 dots horizontal, 768 dots vertical
Power Requirement 100 – 120 / 220 – 240 VAC, 50 / 60 Hz
Input Current 4.6 A (100 – 200 VAC) / 2.2 A (220 – 240 VAC)
Mechanical
Dimensions 9.8" (W)
ן5.6" (H)ן13.4" (D) / 25.0 cm (W)ן14.2 cm (H)ן34.0 cm (D) (Including lens hood and feet)
9.8" (W)
ן5.6" (H)ן12.6" (D) / 25.0 cm (W)ן14.2 cm (H)ן32.0 cm (D) (Not including lens hood)
Net Weight 10.8 lbs / 4.9 kg
Operational Temperatures Projector: 41
°
– 95
°
F (5
°
to 35
°
C), 30 – 85% humidity
Remote control: 32
°
– 140
°
F (0
°
to 60
°
C)
Remote mouse receiver: 32
°
– 140
°
F (0
°
to 60
°
C)
Regulations UL Approved (UL 1950, CSA 950)
Meets DOC Canada requirements
Meets FCC Class A requirements
SPECIFICATIONS 90
Digital Light Proccessing, DLP, Digital Micromirror
Device and DMD are trademarks of Texas Instruments.