Nortel Networks T7406E - Manual (Page 32)

32 Chapter 5 Using the handset
NN40110-110 NN40110-110
Answering a call using the handsfree/speakerphone key
1 Lift the handset.
2 Press the Handsfree/Speakerphone key.
3 To end a call, press the Release key.
Putting a call on hold
1 While a call is active, press the Hold key.
2 To release the call and make it active again, press the flashing indicator key.
Using handsfree/speakerphone
1 Press a line key to make or answer a call.
2 While using the handset, switch the call to handsfree during a call by pressing the Handsfree/
Speakerphone key.
3 To return the call to handset mode during a call, press the Handsfree/Speakerphone key
again.
Using a headset
1 Press a line key to make or answer a call.
2 While using the handset, switch the call to the headset during a call by plugging the headset
into the headset jack.
3 To return the call to handset mode during a call, unplug the headset.
Programming indicator keys
You can program a programmable line or feature indicator key with a new number or feature.
Programming external autodial
1 Press the Feature key.
2 Enter *1 using the telephone dial pad.
3 Press an indicator key.
4 Dial the external number.
5 Select OK to store the number.