Checking the battery voltage, Setting the ring, Setting the ring and vibration options – Nortel Networks T7406E User Manual
Page 29: Setting the ring type, Setting the ring level, Setting the noisy location level
Chapter 4 Configuring the handset settings
29
User Guide
4
Scroll to the
Off
option to turn off key beeps.
Setting the ring and vibration options
1
In programming mode, scroll to the
key Ring/Vibration
menu.
2
Press
Select
.
3
Scroll to the
Ring On
option to turn on only the ringer.
4
Scroll to the
Vibration On
option to turn on only the vibration.
5
Scroll to the
Both On
option to turn on the ringer and the vibration.
6
Scroll to the
Both Off
option to turn off both options.
Setting the ring type
1
In programming mode, scroll to the
Ring Type
menu.
2
Press
Select
.
3
Scroll to one of the eight ring types.
4
Press
Select
.
Setting the ring level
1
In programming mode, scroll to the
Ring Level
menu.
2
Press
Select
.
3
Scroll to one of the three ring (High, Medium, or Low) types.
4
Press
Select
.
Setting the noisy location level
Set the noisy location level in accordance with the noise level in your area. Select 1 if the noise
level is low and 4 if the noise level is high.
1
In programming mode, scroll to the
Noisy Location
menu.
2
Press
Select
.
3
Scroll to one of the four levels.
4
Press
Select
.
Checking the battery voltage
To check the voltage of the handset battery, scroll to the Display Battery menu and press Select.
The approximate voltage of the battery appears.