NEC Projector VT560 - Manual (Page 3)

99-00590-00 Rev A0 Replacing an NEC VT560 Projector (03-00060) in a 2000i-DVX 3 of 15
8. Place the projector and the attached projector plate on a table, with the plate facing upwards.
9. Use the security key to loosen and then remove the three sets of button-head screws, split washers, lock washers and
spacers that secure the projector to the projector plate. Carefully collect them all and place them nearby, as you’ll need
them when you install the replacement projector. Remove the projector and set it aside.
Button-Head Screws, Split
Washers and Lock Washers (x 2)
Projector Plate
Projector Platform