NetComm HS960 - Manual (Page 45)

YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 5
Item Default Description
Web Server
HTTP Port 80 Enter the HTTP port number. The HTTP port allowed range is 80 or 8010 to
8060. For access HS960 system under NAT, please tab the “http://HTTP Port
IP Address: Port Number”.
HTTPS Port 443 Enter the HTTPS port number. The HTTPS port allowed range is 443 or 4430
to 4440. For access the HS960 system, please tab the “https://HTTPS Port IP
Address: Port Number”.
Administrator Idle-
Timeout 5 Minutes The idle time out validity range is 1-1440. If the idle time out is set as 5
minutes, it means if the administrator doesn’t send a packet in 5 minutes, the
administrator will logout automatically.
DHCP Server Enable There are three types of DHCP Services.
DHCP Disable—Disable the DHCP server function.
DHCP Relay—Enable DHCP Relay function.
DHCP Server—Enable DHCP server function.
DHCP Relay To route DHCP through an external server, the administrator needs to enable the DHCP relay and
assign a valid DHCP server IP address.
DHCP Server IP
Address Empty Enter the IP address of DHCP server.
DHCP Server The HS960 ‘s DHCP server is turned on and running by default when you install it in your
network.
DHCP Pool Starting
Address 10.59.1.2 Enter the DHCP Pool Starting IP address.
Pool Size 253 The DHCP pool size range is 1 to 512.
Lease Time 300 Minutes The DHCP lease time. The DHCP lease time range is 1 to 71582788 minutes.
Primary DNS Server 168.95.1.1 Enter the IP address of the network’s primary DNS server.
Secondary DNS Server Empty Enter the IP address of a second DNS server on the network.
Email Server Redirect The HS960 provides an extra email server parameter to forward the subscriber’s email. The
HS960 not only forwards the subscribers’ E-mail via other E-mail server but also changes the
SMTP header. The recipient of your E-mail sees the message as if you sent it from your local
Internet Service Provider.
Note: Before setting this sever, please make sure the e-mail sever relay function is opened. It must not exceed
50 characters.
IP Address or Domain
Name Empty Enter the E-mail server IP address or domain name.
SMTP Port 25 Enter the SMTP port number for mail server. The SMTP port allowed range is
25 or 2500 to 2599.