National Instruments DIO 6533 - Manual (Page 9)

© National Instruments Corporation xi DIO 6533 User Manual
About
This
Manual
This manual describes the electrical and mechanical aspects of the
DIO 6533 (formerly called DIO-32HS) family of devices, and contains
information concerning their operation and programming. Unless
otherwise noted, text applies to all devices in the DIO 6533 family. The
devices named DIO-32HS and 6533 are the same in functionality; their
primary difference is the bus interface.
The DIO 6533 family includes the following devices:
• PCI-DIO-32HS
• PXI-6533
• AT-DIO-32HS
• DAQCard-6533
Organization of This Manual
The DIO 6533 User Manual is organized as follows:
• Chapter 1, Introduction , describes the DIO 6533 (DIO-32HS)
devices, lists what you need to get started, describes optional
equipment, and explains how to unpack your device.
• Chapter 2, Installation and Configuration , explains how to install
and configure your DIO 6533 device.
• Chapter 3, Hardware Overview , provides an overview of the
hardware functions of your DIO 6533 device.
• Chapter 4, Signal Connections , describes how to make input and
output signal connections to your DIO 6533 device via the device
I/O connector and RTSI connector.
• Chapter 5, Signal Timing , provides detailed timing specifications
for DIO 6533 pattern generation and for the various full, two-way
handshaking modes.
• Appendix A, Specifications , lists the specifications for the DIO
6533 devices.