Nokia 3155i - Manual (Page 68)

T o o l s
67
■ Stopwatch
You can use the stopwatch in your device to track time. The stopwatch displays
time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure time
1. In the standby mode, select Menu > Tools > Stopwatch > Split timing or Lap
timing > Start . The running time is displayed.
Split timing —You can use the split time function for such things as a long
distance race when you need to pace yourself. Select Split to note the lapsed
time. The timer continues to run, and the split time appears below the
running time. Each time you select
Split , the new measured time appears at
the beginning of the list.
Lap timing —You can use the lap time function when you want to track how
long it takes to complete each cycle or lap. Select Lap to note the lap time.
The clock stops, then starts immediately from zero. The lap time appears
below the running time. Each time you select
Lap , the new measured time
appears at the beginning of the list.
2. Select Stop to end the timing, and display the total time or Stop > Options >
Start or Reset to continue or reset timing.
Lap and split times
To save a time while the clock is running, select Stop > Save , enter a name for the
measurement, and select OK . If you do not enter a name, the total time is used as
the default title for the lap or split time.
To view a saved time, in the standby mode, select Menu > Tools > Stopwatch >
Show last time or View times .
To delete a saved time from Stopwatch , select View times and the time to delete,
and select Delete > Yes ; or select Delete times > One by one or Delete all .
Operation note
If you press the end key and return to the idle or standby mode, the clock
continues to run in the background, and
appears in the upper left corner.
To return to the stopwatch screens, in the standby mode, select Menu > Tools >
Stopwatch > Continue . To stop the clock, select Stop .