Nokia 3155i - Manual (Page 39)

C o n t a c t s
38
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely on voice dialing in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1. In the standby mode, select Menu > Contacts > Names , and scroll to the entry
in your contacts list to which you want to assign a voice tag.
2. Select Details > Options > Add voice tag > Start .
3. Speak clearly into the microphone. Do not select Quit unless you want to cancel
the recording. The device automatically stops recording, and saves and replays
the voice tag.
appears next to commands that have voice tags assigned.
Dial a number
1. In the standby mode, press and hold the right selection key with the fold open,
or press and hold the voice key regardless of whether the fold is open or closed.
2. When you hear several beeps and Speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the device finds the voice tag, Found: is displayed, and the device
automatically dials the number. If the device does not locate a number or
recognize the voice tag,
No match found is displayed.
Voice tags
1. After you have associated a voice tag to a contact, select Menu > Contacts >
Voice tags and your desired voice tag entry.
2. Select Playback , Change , or Delete .
■ Speed dial
Set up speed dialing
You can associate any entry in the contacts list with a key from 2–9. To dial those
entries, press and hold the assigned key. See "Speed dialing," p. 49 to activate or
deactivate speed dialing.
Assign a key to speed dialing
1. In the standby mode, select Menu > Contacts > Speed dialing .