2 configuring an ip address, 3 configuring the smtp/pop settings, 2 configuring an ip address – Nikon MFX-1930 User Manual
Page 37: 3 configuring the smtp/pop settings
5-11
Network Interface
5.6.2 Configuring an IP address
1
Open the “Internet FAX configuration” screen. (Refer to the page 5-10.)
2
Click [TCP/IP] to open the “TCP/IP Settings” screen.
3
Configure the IP address.
4
Click [Save] to save the settings.
If you want to quit without saving, click [Close].
5
To enable the IP address, the machine should be rebooted. Please
turn the machine “OFF” and then back “ON”.
5.6.3 Configuring the SMTP/POP settings
1
Open the “Internet FAX configuration” screen. (Refer to the page 5-10.)
2
Click [SMTP/POP] to open the “SMTP/POP Settings” screen.
3
Configure the settings.
(Refer to parameter No. 01 to 08 of the “E-mail environment parameters”
on page 5-6.)
4
Click [Save] to save the settings.
If you want to quit without saving, click [Close].