Nikon MFX-1930 - Manual (Page 32)

5-6 Network Interface
E-mail environment parameters
No. Parameter Default Comments
01 Name — The name that is displayed in the sender field
(From) when sending e-mail.
Up to 40 characters.
02 Mail Address — The e-mail address assigned to your machine
for sending and receiving.
Up to 50 characters.
03 SMTP Server SMTP Server — The IP address or domain name for the SMTP
server used for sending e-mail.
Up to 50 characters can be set for a domain
name.
Port No. (25) 25 The SMTP port number. (00000–65535)
Normally, set to “25”.
POP before
SMTP Off For some providers, POP authentication is
required before sending (send request to
SMTP server). In this case, set this to “On”.
04 SMTP AUTH Authentica-
tion None Selects the SMTP method when the SMTP
server requires authentication. SMTP name
and password are used for authentication.
Select either “None”, “PLAIN”, “LOGIN”, or
“CRAM-MD5”.
“None” is not use SMTP authentication.
User ID — The SMTP authentication name.
Up to 50 characters
Password — The SMTP authentication password.
Up to 50 characters
05 POP3 Server POP3 server — The IP address or domain name for the POP3
server used for receiving e-mail.
Up to 50 characters can be set for a domain
name.
Port No. (110) 110 The POP port number. (00000–65535)
Normally, set to “110”.
Use APOP Off When available “APOP”, it will encrypt the
protocol for the POP password security when
connecting with the POP server..
06 Mail Account Account — The POP user name assigned to your
machine.
Up to 50 characters.
07 Mail Password Password — The POP password assigned to your machine.
Up to 50 characters
08 Check
New Mail
Check
Interval 00:10:00 Enter the interval to check and retrieve e-
mail from POP3 server. (00:00:05 to 99:59:59)
00:00:00 is not check for e-mail.