Navman TRACKER 5100I - Manual (Page 36)

36 TRACKER 5100/5100i/5500/5500i Installation and Operation Manual NAVMAN
Physical
Size 150 mm H x 164 mm W x 65 mm D
(5.9" x 6.5" x 2.6").
Weight, display unit 600 g (20 oz).
Display: 5" diagonal; TRACKER 5500, 5500i:
TFT colour, (234 x 320 pixels); TRACKER
5100, 5100i: greyscale, (240 x 320 pixels).
Electrical
Power supply 11 to 18 V DC, 600 mA with full
backlight.
External beeper or light output, switched to
ground, 30 V DC, 200 mA maximum.
Operating Temperature
0°C to 50°C (32°F to 122°F).
Chart and user cards
C-MAP™ NT cards and NT+ cards.
3.3 V C-MAP™ user cards.
Waypoints
Up to 500, with default or user-defined
alphanumeric names up to eight characters.
Routes
25 routes, with up to 50 points each.
Tracks
By time or distance, one track of 2000 points
and four of 500 points.
Alarms
Arrival radius, anchor, XTE, danger, low fuel
(optional); individually controlled.
Loss of GPS/DGPS fix (fixed alarms).
Appendix A - Specifications
Chart datums
140 chart datums (see below).
One user-defined map shift.
Chart scale
0.05 to 4096 nm for chart (chart dependent)
down to 0.01 nm in plotter mode.
Fuel Computer (Optional fuel transducer required)
Outboard carburetted two stroke petrol/gasoline
engines: 30 to 300 hp.
Outboard four stroke petrol/gasoline engines:
90 to 300 hp.
Inboard petrol/gasoline engines: 50 to 300 hp.
Minimum flow rate: 5 litres per hour.
Standards compliance
EMC compliance
USA (FCC): Part 15 Class B
Europe (CE): EN50081-1, EN50082-1
New Zealand and Australia (C Tick):
AS-NZS 3548
Environment: IP67 / CFR46 with card holder in
place.
NavBus
Connection to other NAVMAN instruments.
NMEA
NMEA 0183 ver 2.
Input, from GPS or DGPS receiver: GSA, GSV,
GTA, RMC.
Input, from a depth sounder: SDDPT (preferred)
or SDDBT.
Output, for autopilot or other instrument:
APA, APB, GGA, GLL, GSA, GSV, RMB, RMC,
BWR, VTG, XTE.
150 mm / 5.9"
167.5 mm / 6.6"
65 mm / 2.6"
164 mm / 6.5"