Nokia WAP and SMS gateway - Manual (Page 98)

Chapter 8. Using SSL for HTTP
Using SSL server support for the sendsms HTTP
interface
To use the SSL-enabled HTTP server please use the following configuration directive within the core and
smsbox groups
group = core
...
ssl-server-cert-file = "filename"
ssl-server-key-file = "filenane"
group = smsbox
...
sendsms-port-ssl = true
Using SSL server support for PPG HTTPS interface
If you want use PAP over HTTPS, (it is, a https scheme) add following directives to the ppg core group:
group = ppg
...
ppg-ssl-port = 8090
ssl-server-cert-file = "/home/aarno/kannelcvs/gateway/gw/cert1.pem"
ssl-server-key-file = "/home/aarno/kannelcvs/gateway/gw/key1.pem"
PPG uses a separate port for HTTPS traffic, so so you must define it. This means that you can use both
HTTP and HTTPS, when needed.
91