Nokia WAP and SMS gateway - Manual (Page 54)

Chapter 5. Setting up a SMS Gateway
Modem definitions are now multiple groups present in kannel.conf, either directly or, for example, by
including the example modems.conf. (See Inclusion of configuration files)
Variable Value Description
group modems This is a mandatory variable
id string
This is the the id that should be
used in modemtype variable
from AT2
name string
The name of this modem
configuration. Used in logs
detect-string string
String to use when trying to
detect the modem. See
detect-string2
detect-string2 string
Second string to use to detect the
modem. For example, if the
modem replies with "SIEMENS
MODEM M20",
detect-string could be
"SIEMENS" and
detect-strign2 "M20"
init-string string
Optional initialization string.
Defaults to
"AT+CNMI=1,2,0,1,0"
speed number
Serial port hint speed to use.
Optional. Defaults to smsc group
speed or autodetect
enable-hwhs string
Optional AT command to enable
hardware handshake. Defaults to
"AT+IFC=2,2"
need-sleep boolean
Optional. Defaults to false.
Some modems needs to sleep
after opening the serial port and
before first command
no-pin boolean
Optional. Defaults to false. If the
modem doesn’t support the PIN
command, enable this
no-smsc boolean
Optional. Defaults to false. If the
modem doesn’t support setting
the SMSC directly on the pdu,
enable this. (Default is to include
a "00" at the beginning of the
PDU to say it’s the default smsc,
and remove the "00" when
receiving)
47