Navman Tracker500/500i - Manual (Page 20)

Tracker500/500i User Manual 18
9.3 Fuel remaining change
The fuel remaining value must be changed manually each time you change the amount of
fuel in the tanks (e.g. filling, swapping or syphoning tanks). If it is not, this figure will be
meaningless.
9.4 Fuel remaining low alarm
You can use this feature to warn you when your fuel remaining drops below a certain value.
The value can be set from 1-9999. When the level drops below the value set, a message box
saying “Fuel low alarm” will display, and the unit will beep until “OK” is selected. While the
remaining amount is below the alarm amount, the alarm will re-activate whenever the unit
is switched on, or the fuel remaining amount or low alarm value is changed. The fuel alarm
may be totally disabled by setting the alarm value to 0.