Nikon J1 User Manual
Page 143
123
i
D
Auto Power Off
White balance measurement will end without a new value being
acquired if no operations are performed for the time selected for Auto
power off in the setup menu (
0 151; the default is 30 s).
D
Preset White Balance
The camera can store only one value for preset white balance at a time;
the existing value will be replaced when a new value is measured. Note
that exposure is automatically increased by 1 EV when measuring
white balance; if M Manual is selected for Exposure mode, adjust
exposure so that the exposure indicator shows ±0 (
A
Color Temperature
The perceived color of a light source varies with the viewer and other
conditions. Color temperature is an objective measure of the color of a
light source, defined with reference to the temperature to which an
object would have to be heated to radiate light in the same wave-
lengths. While light sources with a color temperature in the neighbor-
hood of 5,000–5,500 K appear white, light sources with a lower color
temperature, such as incandescent light bulbs, appear slightly yellow
or red. Light sources with a higher color temperature appear tinged
with blue. The camera white balance options are adapted to the follow-
ing color temperatures:
• Sodium-vapor lamps: 2,700 K
•
J (incandescent)/
Warm-white fluorescent
: 3,000 K
• White fluorescent: 3,700 K
•
I Cool-white fluorescent: 4,200 K
• Day white fluorescent: 5,000 K
•
H (direct sunlight): 5,200 K
•
N (flash): 5,400 K
•
G (cloudy): 6,000 K
• Daylight fluorescent: 6,500 K
• Mercury-vapor lamps: 7,200 K
•
M (shade): 8,000 K