NetComm NB6 - Manual (Page 56)

NB6, NB6W, NB6Plus4W User Guide YML854Rev1
56 www.netcomm.com.au
WAN IP Address, WAN Subnet Mask, and Default Gateway:
When choosing Use the following IP address, you have to key in the IP address, the subnet mask,
and the default gateway provided by your ISP for the WAN interface.
If you choose to obtain the IP address automatically or use specific IP address, you have to decide
whether to select Obtain DNS server address automatically or Use the following DNS server address
and enter the information provided by you ISP.
The default setting is none, if selecting
Obtain an IP address automatically or Use the following IP
address, the DNS setting appears, shown as the figure below.
Check Enable NAT if necessary.
Press Next to continue.
Primary IP Address & Subnet Mask:
Key in the IP address and the subnet mask that provided by your ISP for LAN interface, e.g.,
192.168.1.1 and 255.255.255.0, respectively.
MTU:
Please refer to PPPoA/ PPPoE.