NetComm NP290W - Manual (Page 14)

14 NP90W User Guide
YML849Rev 1
7.8 Restore Settings
You can use a backup file with a BAK extension to change device settings.
To restore settings from backup file:
1. From the Web User Interface, click System Menu.
2. Select Configuration Tools.
3. Select Backup Settings/Restore settings.
4. Click Apply. This opens the Configuration Tools page.
5. Under Restore Settings, click Browse. Specify the location of the backup file. The back up files
ends with a BAK extension.
6. Click Restore Settings.
7.9 Reboot
You can reboot the device using the Web User Interface.
To reboot:
1. From the Web User Interface, click System Menu.
2. Select Reboot. This opens the Reboot page.
3. Click Reboot.