NEC LCD4215 - Manual (Page 26)

English-24
DVI MODE Selects the kind of DVI-D equipment which is connected RGB1.
INPUT RGB1 only Selects “DVI-PC” when PC or other computer equipment is connected.
Selects “DVI-HD” when DVD player, which has DVI-D output, is connected.
SCAN CONVERSION Selects IP (Interlace to Progressive) converter function.
INPUT DVD/HD, VIDEO(S), VIDEO only
PROGRESSIVE Enables the IP function, to convert interlace signal to progressive. Normally use this.
INTERLACE Disables the IP function.
NOTE: This mode is better suited for motion pictures, but it is in danger of image retention.
COLOR SYSTEM Selects color system depend on your video format of the input signal.
INPUT VIDEO(S), VIDEO only
(AUTO/NTSC/PAL/SECAM/4.43NTSC/PAL60 )
AUTO: Selects color system setting automatically base on input signal.
SCAN MODE Changes the display area of the image.
INPUT DVD/HD, VIDEO(S), VIDEO only
OVER SCAN Set to display area about 95%
UNDER SCAN Set to display area about 100%
BLACK LEVEL Selects a level of black expansion.
EXPANSION In case of go under the black cut-off level, please adjust the “Black level” in moderation
INPUT VIDEO(S), VIDEO only on OSD menu.
ADVANCED OPTION Resets the all settings within the ADVANCED OPTION menu back to factory setting.
RESET
FACTORY RESET “Selecting “YES” allows you to reset PICTURE, ADJUST, AUDIO, PIP, OSD, MULTI DISPLAY,
DISPLAY PROTECTION and ADVANCED OPTION will be back to factory settings
(except LANGUAGE, DATE & TIME and SCHEDULE).
Select “YES” and press “SET” button to restore the factory preset data.
Press “EXIT” button to cancel and return the previous menu.
ADVANCED OPTION