Setting lan mode, Ip address – NEC LT240 User Manual

Page 102

E-102

USING ON-SCREEN MENU

Menu Descriptions & Functions

Setting LAN Mode

This feature allows you to set various setting items when the projector is

used on your network.

Consult with your network administrator about these settings.

NOTE: A LAN card is required for LAN connection; NEC's optional wireless LAN

card is available. For more information on inserting or ejecting a LAN card, see

pages E-63 and 64.

CAUTION: Make sure that the LAN card is removed during Standby mode

(NOT Idle mode) or with the main power off.

Failure to do so may cause damage to the data on your PC card.

NOTE: LAN card is not available when a PC card is used for the Viewer function.

Viewer is not available when LAN card is used for LAN connection.

IP Address

An IP address can be automatically assigned to this projector by your

DHCP server. If your network does not automatically assign IP address,

ask your network administrator for an address, and then register it manu-

ally.