Electronic vr, W electronic vr, A 113) i – Nikon COOLPIX S203 User Manual
Page 125: A 113

113
Basic Camera Setup: The Setup Menu
S
h
oot
in
g, P
laybac
k
an
d Se
tu
p Me
nus
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when taking still
pictures.
When Auto is selected, R appears on the monitor (
A 6), and electronic VR is
applied depending on shooting conditions.
B
Notes on Electronic Vibration Reduction
• Except during slow sync mode, Electronic VR will not activate when flash is used.
• If the exposure period exceeds a certain period of time, Electronic VR will not function.
• The effectiveness of Electronic VR decreases as camera shake increases.
• Electronic VR does not reduce the effects of subject movement.
• Saving a picture on which Electronic VR is applied may take some time.
• Electronic VR will not activate when sensitivity is ISO 800 or above.
• Electronic VR cannot be used together with date imprint (A 119). When using date imprint,
setting Electronic VR to Auto automatically changes the date imprint setting to Off.
• Electronic VR and auto flash with red-eye reduction cannot be used together.
D
Electronic VR for Movies
To compensate for vibration while shooting a movie, go to the movie menu (
A 71) and enable
Electronic VR (
A 72).
Press the
d button M z (Setup menu) (A 112) M w Electronic VR
Auto
When all of the following conditions are met while taking still pictures, electronic VR
is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous setting is set to Single.
Off (default setting)
Electronic VR is disabled.