Panasonic AJ-YA120AG - Manual (Page 22)

22
Display position
The position where the superimposed characters are
displayed can be changed using menu items No.007
[CHARA H-POS] and No.008 [CHARA V-POS].
Superimposed screen displays
When the DATA+ button or DATA– button is pressed
together with the PAGE button, the superimposing
can be displayed and the established settings can be
checked.
Even while the PAGE button is pressed, the actual
statuses can be checked using the DATA+ button or
DATA– button.
The original display is restored when the MODE
button or SET button is pressed. The control signal, time code, etc. are displayed on
the TV monitor in the form of abbreviations when the
unit’s VIDEO OUT2 connector is connected to a TV
monitor.
In addition, when the optional AJ-YA120AG is
installed, the connector from which the superimposing
is output can be changed using the menu item No.005
[SUPER] setting. (See page 33)
Characters displayed
The background of the characters superimposed on
the display can be changed using menu item No.009
[CHARA TYPE].
TCR 22 : 22 : 22 : 22
TV monitor
T TC CR R 2 2 2 2 :: 2 2 2 2 :: 2 2 2 2 :: 2 2 2 2
TV monitor
Remaining tape display
The display position for the remaining tape display
can be changed using the menu item No.003
[REMAIN SEL] setting. (See page 33)
The figure shows what is displayed when R/TTL has
been selected as the menu item No.003 [REMAIN
SEL] setting.
TCR 22 : 22 : 22 : 22 R 23
/ 30
TV monitor
TCR 22 : 22 : 22 : 22
TV monitor
TCR 22 : 22 : 22 : 22
TV monitor
TCR 22 : 22 : 22 : 22
TV monitor
Abbreviation
CTL (control signal)
TCR (time code playback value)
UBR (user’s bit playback value)
Remaining tape time
Total tape duration