Pentax Optio T10 - Manual (Page 145)

Messages
143
7
App
e
nd
ix
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
Protected
The image or sound file you are trying to delete is
protected.
Data being recorded
Appears when you try to switch to Playback mode while
an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
Data being processed
Appears when the camera takes more than five
seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is
being formatted.
This image/sound cannot be
resized. Appears when you try to resize an image or sound file
that cannot be resized.
This image/sound cannot be
trimmed. Appears when you try to trim an image or sound file that
cannot be trimmed.
No paper in the printer The printer is out of paper.
No ink in the printer The printer is out of ink.
Printer error An error message has been sent from the printer.
Data error A data error message has been sent from the printer.
Paper stuck in the printer The printer has a paper jam.