Philips ST7SB - Manual (Page 5)

ST7SB Socket Board User Guide 1 - Introduction
3/12
Note: The ST7SBxx socket board is meant to program small numbers of microcontrollers (i.e.
prototypes in the development stage). For mass production programming, we recommend
using the appropriate gang, or automated programmer.
1.1 About the user manuals...
This manual will help you set up your socket board. Here you will find information
about:
• Configuring your socket board
• Connecting to your programming tool
• Socket board programming features
For information about the software and additional hardware intended for use with
your socket board, refer to the following documents:
ST7 Visual Programmer on-line help – program your application to your ST7
ST7-STICK User Manual – set up instructions for your ST7-STICK
ST7-EMU3 User Manual – set up instructions for your ST7-EMU3 emulator
ST7-DVP3 User Manual – set up instructions for your ST7-DVP3 emulator
ST7xxxx Datasheet – programming information that is specific to your ST7
microcontroller
ST7-Programming Tool Descriptions – listing of ST7 programming tools and
supported devices
1.1.1 Revision history
Date Revision Description
Aug 2004 1.1 • Update product ordering code to ST7SBxx socket board
Jun 2001 1.1.1 • Added Table 1 – Revision history table
Table 1: STICK User Manual Revision History