Philips ST7SB - Manual (Page 2)

USE IN LIFE SUPPORT DEVICES OR SYSTEMS MUST BE EXPRESSLY AUTHORIZED.
STMicroelectronics PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF
STMicroelectronics. As used herein:
1. Life support devices or systems are those
which (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose
failure to perform, when properly used in
accordance with instructions for use provided
with the product, can be reasonably expected to
result in significant injury to the user. 2. A critical component is any component of a life
support device or system whose failure to
perform can reasonably be expected to cause the
failure of the life support device or system, or to
affect its safety or effectiveness.
INSTRUCTIONS FOR USE—WARNING
This product is conform to the 89/336/EEC Directive. It complies with the ITE EN55022 standard for
EMC emissions and generic 50082-1 (1992 edition) immunity standards.
This product is an FCC Class-A apparatus. In a residential environment, it may cause
radioelectrical disturbances.
In addition, this programming board is not contained in an outer casing; consequently, it cannot be
immune against electrostatic discharges (ESD). It should therefore be handled only in static safe
working areas. Please refer to
Appendix A Safety Requirements on page 9 for relevant safety
information