Philips SIC 3608S/G7 - Manual (Page 17)

To change the Flash Mode:
While in PHOTO mode, press the navigation stick to the Left.
Each press left will cycle through the Flash Modes.
The flash mode will be displayed on the LCD viewfinder as
follows:
Note:
• When the Flash is in Auto or On mode, the LCD viewfinder
screen will be blank after the flash has fired and is charging.
Wait until the charge is complete and an image appears in the
viewfinder before shooting another photo.
• Shooting in bright environments with the flash turned on can
result in incorrect exposure.
• The flash will not function in “Burst snapshot” mode.
• To prolong battery life, the flash will not function when the
battery is low.
16
Auto: Automatically turn on/off
Flash on: Force the flash on
Flash off: Force the flash off
A