Planet Technology POE-152 - Manual (Page 7)

- 7 -
2.2 POE-152, the Injector installation
1. Connect a standard network cable from Switch/workstation to “Ethernet” port of POE-152.
2. Connect the long cable that will be used to connect to the remote device to the port “Ethernet + DC”. The screen in
Figure 1 appears.
3. Connect the AC adapter to “DC 48V” of POE-152. The power LED will be steady on.
Figure 1: the Injector installation
2.3 POE-152 and POE-152S, the IEEE 802.3af Injector and Splitter installation
1. Connect a standard network cable from “Ethernet+DC” of POE-152 to “Ethernet+DC” of POE-152S. The POE LED of
POE-152 / POE-152S will light on continuance. The screen in Figure 2 appears.
Figure 2: Connection to POE-152S
2. Connect the UTP cable in the package from “Ethernet” of POE-152S to the RJ-45 port of remote device.
3. Connect proper DC plug from “DC OUT” of POE-152S to remote device.
4. Power on the remote device and the LED indicator on POE-152S will remains on, the screen in Figure 3 appears.
From POE-152 or
IEEE 802.3af Power
Supply equipment