Planet Technology POE-152 - Manual (Page 4)

- 4 -
1. INTRODUCTION
1.1 Checklist
Thank you for purchasing our POE-152 IEEE 802.3af Power over Ethernet Injector, your Power over Ethernet
Injector package shall contains following contents:
Check the contents of your package for following parts:
Power over Ethernet Injector x1
User's manual CD x1
Power Adapter x1
Power cord x 1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton
including the original packing material, and use them against to repack the product in case there is a need to return it to
us for repair.
1.2 About the Power over Ethernet Injector
The POE-152 is an IEEE 802.3af Power over Ethernet Injector that provides DC 48V over Ethernet cables. The POE-152
IEEE 802.3af Power over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the cable between the Injector
(POE-152) and Splitter (POE-152S-5V/12V) to transfer data and power simultaneously. The maximum distance between
the Injector (POE-152) and Splitter (POE-152S-5V/12V) is 100 meters. With POE-152 being installed, it combines the
Ethernet digital data with power over the twisted pair cables as an IEEE 802.3af Power over Ethernet Injector. And the
IEEE 802.3af Power over Ethernet splitter shall separate the digital data and the power into two outputs.
Unlike existing Power over Ethernet Injector, except the 10/100Mbps Fast Ethernet connection ability, the POE-152 also
provide 1000Mbps Gigabit Ethernet connection ability.
With IEEE 802.3af Power over Ethernet devices being installed, the system administrator only has to use a single RJ-45
Ethernet cable to carry both power and data to each device. Besides, to connect through POE-152 and
POE-152S-5V/12V, you could also have benefits including cost saving, easy for networking planning and higher reli-
ability. What’s more, upon any IEEE 802.3af devices being installed, the POE-152 or together with POE-152S-5V/12V
can make the connection while migrating or splitting the power and the Ethernet digital packets, such as connecting the
POE-152 to an IEEE 802.3af complied devices, AP or IP phone.
1.3 Features
Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u /802.3ab 10/100/1000Base-T
Provides DC 48V power over RJ-45 Ethernet cable to device with Ethernet port
LED indicators power input indication
Distance up to 100 meters
Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation
Works with EIA568, category 5, 5e or 6 ,2/4-pair cables for 10Base-T or 100Base-TX and 1000Base-T
EMI standards complies with FCC, CE class B