Panasonic AJ-SD755P - Manual (Page 41)

41
Setup menus
The underlined items indicates the initial setting.
USER menu
No./Item Description
320
VAR FWD
MAX
This sets the maximum SLOW FWD speed.
0000 +4.1 : +4.1 (+3.1)a speed
0001 +1.85 : +1.85a speed
0002 +1 : +1a speed
O The value for the DV/DVCAM tape is shown in
parenthesis ( ).
O At any speed setting other than +4.1, the
phase cannot be synchronized from the editing
controller.
323
JOG FWD
MAX
This sets the maximum JOG FWD speed.
0000 +4.1 : +4.1 (+3.1)a speed
0001 +1.85 : +1.85a speed
0002 +1 : +1a speed
O The value for the DV/DVCAM tape is shown in
parenthesis ( ).
O The maximum speed is set to +1a when the
dial on the front panel is operated.
O At any speed setting other than +4.1, the
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
324
JOG REV MAX
This sets the maximum JOG REV speed.
0000 –4.1 : –4.1 (–3.1)a speed
0001 –1.85 : –1.85a speed
0002 –1 : –1a speed
0003 –0.43 : –0.43 (–0.5)a speed
O The value for the DV/DVCAM tape is shown in
parenthesis ( ).
O The maximum speed is set to –1a when the
dial on the front panel is operated.
325
POSTROLL
TM
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-
second units.
0000 0s
0001 1s
0002 2s
0003 3s
0004 4s
0005 5s
321
VAR REV MAX
This sets the maximum SLOW REV speed.
0000 –4.1 : –4.1 (–3.1)a speed
0001 –1.85 : –1.85a speed
0002 –1 : –1a speed
0003 –0.43 : –0.43a speed
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
No./Item Description
311
AUD EDIT IN
This selects the connection method for the
digital audio edit IN point.
0000 CUT : Cut processing
0001 FADE : V Fade processing
312
AUD EDIT
OUT
This selects the connection method for the
digital audio edit OUT point.
0000 CUT : Cut processing
0001 FADE : V Fade processing
313
AUTO ENTRY
This selects whether the IN point is to be
entered using the PREROLL button when it
has not been entered.
0000 DIS : IN point is not entered.
0001 ENA : IN point is entered.
314
CF ADJ SEL
This selects the CF adjustment deck with
deck-to-deck editing.
0000 PLAYER :
The player’s edit IN/OUT points are adjusted.
(reference as the RECORDER side)
0001 RECORD :
The recorder’s edit IN/OUT points are
adjusted. (reference as the PLAYER side)
315
AFTER
CUE-UP
This selects the mode after cue-up operation
is complete.
0000 STOP : STOP mode
0001 STILL : SHTL STILL mode
0002 STILL2 : SLOW STILL mode