Listening to the radio, Automatically saving station presets, Listening to station presets – Pioneer S-GX3V User Manual
Page 17: Listening to other sources, Setting the sleep timer, Getting started 04
Getting started
04
17
En
English
Français
Deutsch
Nederlands
Italiano
Español
Listening to the radio
Use the auto station preset feature explained
below to memorize and recall the AM and FM
radio stations in your area (to tune manually,
see
Manual tuner features
on page 25).
Automatically saving station presets
1
Press
TUNER
(
FM/AM
) to select the tuner.
2
Press
SYSTEM SETUP
(
SHIFT
+
HOME
MENU
), use
/
to choose ‘A. PRSET’ then
press
ENTER
.
Auto tuning starts in the FM band, stopping
when a strong signal is received.
3
When auto tuning stops at a station, press
ENTER
to save the station as a preset, or press
/
to continue without saving.
Auto tuning resumes. After the FM band is
finished, auto tuning continues in the AM
band. Press
(stop) anytime to exit.
Auto tuning stops automatically after the AM
band is finished, or after the limit of 30 presets
has been reached. When this happens, the
tuner automatically switches to preset
ST-1
.
Listening to station presets
1
Press
TUNER
(
FM/AM
) to select the tuner.
2
Use the
ST +/–
buttons to select a preset.
• You can also use the number buttons and
ENTER
to do this.
Listening to other sources
You can connect an external source for
playback through this system’s speakers. See
Connecting auxiliary components
on page 9 for
1
Make sure that the external source (TV,
MD player, etc.) is switched on.
2
Press
LINE
(
SHIFT
+
TAPE
) to select the
source connected to the rear panel LINE input.
3
If necessary, start playback of the source.
• Note that this source is not output from the
LINE OUT
auxiliary jacks.
Setting the sleep timer
The sleep timer dims the display and switches
off the system after a specified time so you can
fall asleep without worrying about it.
•
Press
SLEEP
(
SHIFT
+
DISPLAY
) repeatedly
to select a switch-off time.
Choose between the following options:
•
OFF
– Cancels the sleep timer
•
SLEEP 30
– Switches off after 30 minutes
•
SLEEP 60
– Switches off after an hour
•
SLEEP 90
– Switches off after 90 minutes
•
AUTO
– Switches off automatically after
the currently playing CD, Video CD, DivX
video or tape has finished.
1
To check the current setting, press
SLEEP
(
SHIFT
+
DISPLAY
) once.
Note
1 •
AUTO will not work with DVD/CDs in repeat play, cassette tapes in endless mode, WMA/MP3s or Video CD/Super VCDs
during PBC playback.
• The system will switch into standby after a minute if you change the input function during
AUTO sleep mode.
XV-GX3.book 17 ページ ２００５年７月６日 水曜日 午前１１時４２分