Philips DC200/79 - Manual (Page 12)

PROGRAMING TRACK NUMBERS
1 Press
9 to stop the playback.
2 Press PROG to enter the programming mode.
™ The current album number flashes.
3 Press ¡1 / 2™ to select a desired album number.
4 Press PROG to confirm.
™ The current track number flashes.
5 Press ¡1 / 2™ to select a desired track number.
6 Press PROG to confirm.
7 Repeat steps 3-6 to select and store all desired tracks.
8 To start playback of your programme, press
2;.
Helpful hints:
– Up to 999 playable audio files stored on a USB mass storage device can be
played on DC200.
– Up to 99 playable albums stored on a USB mass storage device can be select-
ed and displayed on DC200.
– Make sure that file names of MP3 files end with .mp3. and the file names of
WMA files end with .wma.
– For DRM protected WMA files, use Windows Media Player 10 (or later) for
conversion. Visit www.microsoft.com for details about Windows Media
Player and WM DRM (Windows Media Digital Rights Management).
– For USB device playing, if the display shows "OL", it means that the USB
device is electrically overloading DC200. You need to change a USB device.
SLEEP
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a preset period of time.
Setting and switching off SLEEP
1 Set your timer by pressing SLEEP repeatedly until the desired timer option appears.
™ Selections are follows (time in minute):
120
=90=60=30=15=OFF=120
2 The set will turn off automatically at the selected time.
3 To cancel sleep, press either:
– POWER
– SLEEP once or more until OFF appears on the display.
DC200_79_CCR 2008.2.21 17:01 Page 12