Philips DC200/79 - Manual (Page 10)

PLAYING iPod USING DC200
1 Remove the top cover of dock.
2 Snap the compatible iPod into the dock connector.
3 Press SOURCE repeatedly to switch on the iPod mode.
• Make sure that you have powered on Apple iPod before selecting iPod source.
™ On the DC200’s display, “iPod” is displayed when iPod is connected.
4 The connected iPod player will play automatically.
Notes:
– By using the buttons (
2;, ¡1, 2™ and VOLUME ) on the DC200, the following
playback features are available: Play/Pause, selecting next/previous track, fast for-
warding/rewinding and changing volume.
– The buttons ( 2;, ¡1, 2™ and VOLUME ) on the DC200 can work only with
playback of the audio contents stored on the docked player.
– To navigate the iPod menu, you may use iPod MENU, 3 4 and OK buttons on
the set.
– When you press iPod MENU in iPod mode, 1 2 3 4 and OK buttons first per-
form the navigation function, and then restore the original functions.
– For iPod operations and features, refer to the user manual of your iPod player.
– This set does not support iPod video output.
Using USB connectivity
• DC200 is fitted with a USB port on the top panel, offering a plug and play feature
which allows you to play, from your DC200, digital music and audio contents stored
on a USB mass storage device.
• Using a USB mass storage device, you can also enjoy all the features offered by
DC200.
Compatible USB mass storage devices:
With the DC200, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USB device which requires driver installation under Windows XP is not
supported.
DC200_79_CCR 2008.2.21 17:01 Page 10