Pioneer Super Tuner III D AVH-P6850DVD - Manual (Page 63)

Black plate (63,1)
2 Touch to search for available cellular
phones.
While searching,
Search flashes. When avail-
able cellular phones featuring Bluetooth wire-
less technology are found, device names or
Name Not Found (if names cannot be ob-
tained) are displayed.
# If this unit fails to find any available cellular
phones,
Not Found is displayed.
3 Touch the device name you want to
connect.
While connecting,
Connect flashes. To com-
plete the connection, please check the device
name (
Pioneer BT unit) and enter the link
code on your cellular phone. If the connection
is established,
Connected is displayed.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 97.
Using a cellular phone to
initiate a connection
1 Touch PHONE CONNECT on the function
menu.
2 Touch CONNECT OPEN.
The unit is now on standby for connection
from cellular phone.
3 Use cellular phone to connect to this
unit.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 97.
Disconnecting a cellular phone
1 Touch PHONE CONNECT on the function
menu.
2 Touch DISCONNECT to disconnect the
currently connected cellular phone from
this unit.
After the disconnection is completed,
No Connection is displayed.
Registering connected
cellular phone
1 Touch PHONE REGISTER on the function
menu.
Registration assignments appear on the dis-
play. From the top to the third assignment are
for User phone 1, 2 and 3. The rest two assign-
ments are for Guest phone 1 and 2.
2 Touch and hold one of the registration
assignments to register the currenctly con-
nected phone.
If the registration is succeeded, the device
name of the connected phone is displayed in
the selected assignment.
# If the assignment is empty, No Data is dis-
played. If the assignment is already taken, the de-
vice name appears. To replace an assignment
with a new phone, first delete the current assign-
ment. For more detailed instructions, see Deleting
a registered phone on the next page.
# If the registration failed, device name of the
connected phone is not displayed in the selected
assignment. In this case, return to step 1 and try
again.
63
Bluetooth Telephone
En
63
Section
15
Bluetoot
h
Teleph
one