Available accessories, Using its playlists – Pioneer DEH-P5900IB User Manual

Page 51

# If you do not operate functions except for
ITS memo and TitleInput "A" within about 30
seconds, the display is automatically returned to
the ordinary display.

Function and operation

Play mode, Random mode, Scan mode,
Pause, Compression and TitleInput "A" op-
erations are basically the same as that of the
built-in CD player.

Function name

Operation

Play mode

Refer to Selecting a repeat play
range on page 15.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
as below:
! M-CD repeat – Repeat all

discs in the multi-CD player

! Track repeat – Repeat just the

current track

! Disc repeat – Repeat the cur-

rent disc

Random mode

Refer to Playing tracks in random
order on page 15.

Scan mode

Refer to Scanning folders and
tracks on page 15.

Pause

Refer to Pausing disc playback on
page 16.

Compression

Refer to Using compression and
BMX on page 16.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
of BMX.
The settings can be switched as
below:
COMP OFF

—COMP 1—COMP 2

—COMP OFF—DBE 1—DBE 2

ITS play mode

Refer to Using ITS playlists on this
page.

ITS memo

Refer to Using ITS playlists on this
page.

TitleInput "A"

Refer to Entering disc titles on
page 16.

Notes

! If you select other discs during repeat play,

the repeat play range changes to
M-CD repeat.

! If you perform track search or fast forward/re-

verse during

Track repeat, the repeat play

range changes to

Disc repeat.

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot
switch to

TitleInput "A". The disc title has al-

ready been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)

Play a CD that you want to program.

Push

MULTI-CONTROL up or down to select

the CD.

Use MULTI-CONTROL to select

ITS memo in the function menu.

Select the desired track by pushing

MULTI-CONTROL left or right.

Push MULTI-CONTROL up to store the

currently playing track in the playlist.
Memory complete is displayed and the cur-
rently playing selection is added to your play-
list.

Available accessories

English

Section