Available accessories, Selecting a channel in the channel category, Displaying the radio id – Pioneer DEH-P5900IB User Manual

Page 34

Use MULTI-CONTROL to store the se-

lected station in memory.
Turn to change the preset number; press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station; press to select.

# You can also change the station by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.

Using the remote control

% When you find a station that you want
to store in memory, press one of preset
tuning buttons 1 to 6 and hold until the
XM preset number stops flashing.
The number you have pressed will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.

# You can also recall stations assigned to preset
tuning numbers by pushing

MULTI-CONTROL up

or down.

Selecting a channel in the
channel category

You have two methods for selecting a channel:
by number and by category. Selecting
Category enables you to narrow your search
down to only channels in a particular category.

Press and hold CLOCK to switch to

Category (channel category select setting).
CAT appears in the display.

# To return to Channel number (channel num-
ber select setting), press and hold

CLOCK again.

Push MULTI-CONTROL up or down to

select the desired channel category.

Push MULTI-CONTROL left or right to

select the desired channel in the selected
channel category.

Note

You can also select the XM channel select setting
in the menu that appears by using
MULTI-CONTROL.

Displaying the Radio ID

Channel number select setting

If you select

CH 000, the ID code is displayed.

% Push MULTI-CONTROL left or right to
select CH 000.

Channel category select setting

RADIO ID is provided as a channel category
for displaying the ID code.

% Push MULTI-CONTROL up or down to
select RADIO ID from channel category.

# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.

Available accessories

Section