Planar PL1500M - Manual (Page 9)

6
Tilting the Monitor
The monitors have a tilt feature that allows you to tilt the monitor back and forth as
well as left and right to find the most comfortable viewing position. To tilt the
monitor, grasp the sides and push the monitor back or pull it toward you, or turn it
left or right until it is in the desired position. The monitor can be tilted 20º backward
and 5º forward, or 45º left and 45º right.
Note:
Do not tilt the monitor by grasping the top edge.
Mounting the Monitor
You can remove the monitor base to mount the monitor on a wall, a swing arm or
other mounting fixture.
Note:
Be sure to turn off the monitor and disconnect all cables before
beginning the disassembling procedure.
1.
Lay the front bezel down on a soft area.
2.
Remove the screw at the bottom of the monitor base.
3. Remove the four screws as shown in the following illustration.
3.
Remove the monitor base from the monitor.
4.
To mount the monitor, follow the instructions included with the mounting
fixture to be used.