Workflow 2: xsend from blue to san – Pinnacle Design Pinnacle Systems Media Stream Media Gateway 37T100105 User Manual
Page 66
Chapter 5: Workflow Scenarios
66
MMG Installation, Setup, and Operations Guide
Workflow 2: XSend from Blue to SAN
Figure 5-6: Workflow 2
Follow these steps:
1.
Determine the name of the sequence you want to send. The name of the sequence currently
on the timeline can be found above the inlay.
Figure 5-7: Name Sequence
2.
Locate the sequence in the sequences rack.
Figure 5-8: Sequence Rack
SAN
Connect Plus 1000
Liquid blue
Workstation
FTP