Pinnacle Design Pinnacle Systems Media Stream Media Gateway 37T100105 - Manual (Page 19)

Chapter 3: Installation and Setup
MMG Installation, Setup, and Operations Guide 19
5. Select the destination folder for the installed application or accept the default location. Click
Next.
6. In the Startup Settings window (Figure 3-8), accept all of the default values.
Figure 3-8: Server Setup Window
7. Click Install to start the installation. A progress bar shows the percentage of the installation
completed.
Figure 3-9: Installation Status Window
8. After the installation is complete, the InstallShield Wizard Complete window is displayed.
Click Finish.
Note: The FileZilla server automatically initiates a console connection after install. The default
configuration uses a login: root, and password: .root. It also uses a default home directory:
R:\import. If you are using these settings, you can skip the next section, Configure the FileZilla
(FTP) server connection. If you are installing the MMG client on a PS100 system, you need to
change the home directory and set speed limits. Please see FileZilla configuration for a PS100: on
page 22.