Philips DVD VIDEO/ SACD PLAYER DVP900SA/00_A - Manual (Page 23)

/00_3139 246 13872
English
23
IMPORTANT!
If the inhibit icon (X) appears on the
TV screen when a button is pressed,
it means the function is not available
on the current disc or at the current
time.
Playing discs
1
Press SELECT button until “DVD” is
lighted on the remote control display
panel
(see remote control, page 17).
2
Turn on the TV and set it to the correct
Video In channel. (See page 18 “Setting up
the TV”).
3
Press STANDBY-ON B on the front of
the DVD Player.
➜
You should see the Philips DVD
background screen on the TV.
4
Press OPEN/CLOSE
0 to open the disc
tray and load a disc. Press again to close
the disc tray.
➜
Make sure the label is facing up. For
double-sided discs, make sure the label of
the side you want to play is facing up.
5
Playback may start automatically
(depending on the disc type).
➜
If a disc menu appears on the TV, see
“Using the Disc Menu”.
➜
If the disc is locked by parental control,
you must enter your four-digit password.
(See pages 36-37).
6
At any time, simply press STOP 9 to
stop playback.
Disc Operations
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
the disc.
To select a playback feature or item
●
Use the 1 2 3 4 or numeric keypad
(0-9) on the Remote Control, then press
PLAY B or OK to start playback.
To access the menu
●
Press DISC MENU on the Remote
Control.
Display on LCD
Area 1
– Currently playing logo or media will be
lit during playback.
Area 2A
– Indicates current information in the
disc or media during playback.
Area 2B
– Indicates current disc or media elapsed
time.
Area 3
– Indicates current mode of the DVD
Player.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Area 1
Area 2A
Area 2B
Area 3
01-41 DVP900_00A1 15/09/2004, 10:01 AM 23