Peavey MMA8352 - Manual (Page 9)

9
Figure 2
Installing Rack-mount Ears
This unit can be rack-mounted in a standard EIA equipment rack with the two included rack ears. To
attach the ears‚ simply remove the three screws already in the front of each side of the unit and
align the ears with the appropriate mounting holes. It may be desirable to remove the rubber feet
from the bottom of the unit when mounting in an equipment rack.
Note: To provide adequate ventilation‚ leave at least one rack space between units when multiple
amplifiers are mounted in the same equipment rack. For proper operation of this unit‚ do not place
within 6" of any wall or combustible surface.