Planar PT1814NUV User Manual
Page 14
User’s Manual
8
Basic Setting
CONTRAST
To adjust the contrast level of the display.
BRIGHTNESS
To adjust the brightness level of the display.
VIDEO LEVEL
Fine tuning the input signal voltage level. Perform this function whenever the PC graphic
card is changed.
GAMMA
To select a suitable color representation.
FRAME
To select different border colors (up to 64 colors) when the display is not in full screen
size.
TO MAIN MENU
Return to Main Menu
Position
CLOCK
To adjust the display pixel alignment.
PHASE
To adjust the screen display for focus and clarity.
DEFAULT SIZE
To enable monitor for full screen expansion when resolution is less than the maximum.
NATIVE SIZE
Display resolutions are set to actual size.
H-POSITION
To adjust the display position horizontally.
V-POSITION
To adjust the display position vertically.
H-SIZE
To adjust the display size horizontally.
V-SIZE
To adjust the display size vertically.
GRAPH/TEXT
To select either 720X400 or 640x400 DOS modes.
TO MAIN MENU
Return to Main Menu.
Color Temp. Menu
9300
To select the color temperature at CIE coordinate 9300
°
6500
To select the color temperature at CIE coordinate 6500
°
USER
Select this option to enable the “User Color” field. Individual R, G, B level can be
adjusted.
TO MAIN MENU
Return to Main Menu.
Miscellaneous Menu
AUDIO VOLUME
To adjust the audio volume of the monitor’s speakers.
OSD H-POSITION
To adjust the horizontal position of the OSD menu.
OSD V-POSITION
To adjust the vertical position of the OSD menu.
DISPLAY MODE
Select this function to display the resolution and frame rate of the current screen
display.
F/W VERSION
Select this function to display the firmware version of the monitor.
TO MAIN MENU
Return to Main Menu.
Reset Menu
BASIC SETTING
To set the function parameters in the Basic Setting Menu to the default values.
POSITION
To set the function parameters in the Position Menu to the default values.
COLOR TEMP.
To set the function parameters in the Color Temp. Menu to the default values.
MISCELLANEOUS
To set the function parameters in the Miscellaneous Menu to the default values.
ALL FUNCTIONS
To set all adjustable parameters to the default/factory values.
TO MAIN MENU
Return to Main Menu.