Pioneer DC500 - Manual (Page 47)

EN-47
Magnifying Images
While reviewing your images, you may enlarge a selected portion of an image. This magnification allows
you to view the details. The zoom factor is displayed on the screen, showing the current magnification ratio.
Images that are being playback can be enlarged in 14 levels of 8 times enlargement.
1. Press the MODE button to access [ (PLAY) ] mode with ▲,▼, t,
or u, then press the OK button.
2. In the [ (PLAY) ] mode, use t or u to select the desired images.
To view the previous image, press the t button.
To view the next image, press the u button.
3. Adjust the zoom ration by using the T/W button.
To enlarge the selected image, press the T button.
To return to the normal image, press the W button.
The magnification factor is displayed on the LCD monitor.
4. To view different portion of the images, press ▲,▼, t, or u to
adjust the display area.
The displayed image is enlarged; you will see a white frame
with a pink box inside. The white frame indicates the entire
image, while the pink box shows the location of the currently
enlarged area.
The magnification factors range from 1.5x to 8x within 14 stages: 1.5x, 2.0x, 2.5x, 3.0x, 3.5x, 4.0x, 4.5x,
5.0x, 5.5x, 6.0x, 6.5x, 7.0x, 7.5x and 8.0x.
1.5x
8x